Product Details
LIB Portable Cooling Environmental Chamer is capable of simulating various temperature, humidity and other environmental conditions. Suitable for testing biological items, industrial products, materials, and electronic equipment and components. Independent devices can have an environmental impact on the sample. The test chamber has 50L and 80L to choose,which is portable and easy to operate.
Features of Cooling Environmental Chamber
– Interior Volume: 50L, 80L;
– Temperature Range: A(-20℃～+150℃), B(-40℃～+150 ℃), C(-70℃～+150 ℃);
– Material: SUS304 stainless steel;
– Heating Element: Nichrome heater;
– Standard Configuration: 1 Cable hole (Φ 50,) with plug; 2 shelves;
– Controller: programmable color LCD touch screen controller, ethernet connection, PC Link
Product Parameters
Name LIB Portable Cooling Environmental Chamer
Model
TH-50 (320*350*450mm, 800*1050*950mm), 50L
TH-80 (400*400*500mm, 900*1100*1000mm), 80L
Heat load
1000W
Temperature Range
A : -20℃ ～ +150 ℃; B : -40℃ ～ +150 ℃; C: -70℃ ～ +150 ℃
Temperature Fluctuation
± 0.5 ℃
Temperature Deviation
± 2.0 ℃
Humidity Range
20% ~ 98% RH
Humidity Deviation
± 2.5% RH
Cooling Rate
1 ℃ / min
Heating Rate
3 ℃ / min
Cooling system
Mechanical compression refrigeration system
Refrigerating unit
French TECUMSEH compressor
Refrigerant
R404A, R23
Controller
Programmable color LCD touch screen controller, Ethernet connection, PC Link
Air Circulation
Centrifugal wind fan
Safety Device
Humidifier Dry-combustion protection; Over-temperature Protection; Over-current Protection;
Refrigerant High-pressure protection; Water Shortage Protection; Earth leakage Protection
Exterior Material
Steel Plate with protective coating
Interior Material
SUS304 stainless steel
Thermal Insulation
Polyurethane foam and insulation cotton
Observation Window
Interior lighting, double-layer thermo stability silicone rubber sealing
Standard Configuration
1 Cable hole (Φ 50,) with plug; 2 shelves
Power Supply
220V 50Hz / 380V 50Hz
Maximum Noise
65 dBA
Environmental Conditional
5℃～+35 ℃ ≤85% RH
Product Structures
LIB Portable Cooling Environmental Chamer (8) LIB Portable Cooling Environmental Chamer (9)
Temperature and Humidity Sensor
PT-100 Class A sensor, real-time accurate detection and display of temperature changes at 0.001 degrees.
Humidity System
When the current humidity is less than the set point humidity, the equipment is automatically humidified. The humidification of is automatically heated by the humidification tank.
LIB Portable Cooling Environmental Chamer (2) LIB Portable Cooling Environmental Chamer (3)
Air Circulation
The high-quality centrifugal fan is used to strongly supply air circulation, making the temperature distribution in the test area uniform.
Cooling System
the refrigerant completes a refrigeration cycle through four basic processes of evaporation, compression, condensation, and throttling in the system.
LIB Portable Cooling Environmental Chamer (1) LIB Portable Cooling Environmental Chamer (4)
Build-in Water Tank
The water stored in the built-in water tank meets the needs of the test. When there is a low water level, it will alarm to indicate that water needs to be added.
Cable Hole
The standard inner hole diameter is 50mm.
Soft silicone plug seal; Metal enclosure closed, beautiful designed.
Applications & Configuration
LIB Portable Cooling Environmental Chamer is widely used in Automobile, Material, Electronics, Aerospac, PV panels, Navigation, Commodity, Paintings, Battery, Pharmaceutical, Military and Cable industry.
Insulation: 10cm thick polyurethane foam and insulation cotton; Better insulation performance, degradation resistance, environmental protection, noise reduction.
External Materials: A3 steel plate with galvanized coating; Electrostatic treatment; High and low temperature corrosion resistance; High hardness, anti-impact, Very high safety factor; Color can be customized.
Cable Hole: A standard test hole, located at the left side of the work room, is provided with a sleeve inside to prevent moisture from entering the insulation layer. Equipped with flange. The standard inner hole diameter is 50mm. Soft silicone plug seal; Metal enclosure closed, beautiful designed.
LIB provide options for customer to meet the test requirements, including size of sample shelf, length of cable wire, size of test hole, observe window size and controller system.
leave your message below if you interest, we will reply you at once.
http://www.lib-climaticchamber.com