Full Job Description:
Advantage
Standard lengths of aluminum spigot truss are 16', 14', 12', 10', 8', 6'and 5', other lengths can be provided upon request.
All newly purchased 290x290mm Square Aluminum Spigot Truss can be upgraded to our patent.
Slide the journal to create an arch.
Includes standard hardware connections.
Made of Aluminum alloy 6061-T6/6082-T6 sourced and produced in China.Aluminum spigot truss is light weight, good ductility, corrosion resistance and long service life.
Maintain a longer-lasting smooth appearance than existing standard aluminum materials.
Welders certified by AWS D1.2 are manufactured in China.
Surface treatment: grinding, polishing, black powder coating. Other colors available upon request
Even with the use of good materials, aluminum spigot truss needs years of experience teachers with superb technology welding, better welding process, beautiful welding scars, making aluminum spigot truss not easy to tear, longer service life.
Spigot Aluminum Truss rack details
1、Composed of international standard aluminum alloy 6061-T6/6082-T6
2、Imported welding rod
3、Check the weight load before delivery
4、The design is freely completed by the professionals of your choice
Square Aluminum Spigot Truss Usage
It is suitable for exhibition building, store decoration and advertising. This single pipe has the best lifting capacity, and with its lightweight structure shows a low transportation volume.
Indoor: live stage, stage, theater, booth, car booth, wedding, etc.
Outdoor: event gathering, LED display frame, concert, trade fair display, church installation mobile application, etc.
Features of Square Aluminum Spigot Truss
It can be replaced, can be used again, and can provide lifetime service
Rust-proof, fire-proof, wear-resistant, light weight, high carrying capacity
Bolt type trusses are more popular and easier to arrange than bolt type trusses, and are easy to transport and stock
High quality: Superb craftsmanship ensures product quality
The truss can be perfectly connected with the global truss.
Aluminum Spigot truss installation recommendations:
Range: 1-12m
If the beam range is less than 12m, a truss of 290 * 290 mm is provided
Range: 12-18m
If the beam range is between 12m and 16m, 400 * 400 mm trusses can be provided
Range: 18-22m
If the beam range is between 16m and 20m, a 500 * 500 mm truss can be provided
Range: more than 22m
If the beam range is greater than 20m, a truss of 760 * 600 mm is provided
Build concert stage truss, concert truss process
Materials required to build a 12*6*6m concert stage: 12*3m concert stage trusses, 8*2m concert trusses, 8*1m concert trusses, 8*diagonal supports, 4*iron bases, 4*counter-heads, 4*square sets, 4*cross-arms, 4*slings, 4*hoists, screws, etc.
Note: Generally, the commonly used aluminum truss column is 300*300MM cross-section, and the truss beam is 300*300MM if the hanging stuff is not very heavy, and 400*400 or 450*450 if the span is large or the hanging light is heavy.
Concert stage truss construction method.
1. First on the ground in the general location of the four concert stage truss base.
2. In the outer part of each base inserted into the bottom part of the diagonal support.
3. The reverse head with screws fixed in the base of the concert truss.
4. Set the square sleeve on the counter head.
5. Link the crossbeams together.
6. The ends of the crossbeam and the two sides of the two square sleeve docking link, at this time the crossbeam part of the ground are assembled.
7. Connect the concert truss lying flat, then screw one end on the counter head and the other end on the cross stretcher, and at the same time link the hanging hoist with the cross stretcher, the hoist is used to lift the cross beam truss below.
8. More than one person together to slowly erect the concert truss, taking care not to push the column too hard, and then fix the screws above the counter head.
9.After the column is erected, hook the hook underneath the suspension hoist through the sling to the crossbeam below.
10.Slowly tug the hanging hoist to pull the beam up;
11.In the beam above the installed lighting and sound equipment.
12.Tugging the hanging hoist to a predetermined height to stop.
13.One end of the diagonal support and the column tightened, the other end and the base of the horizontal support tightened, so that the concert stage is built.
https://www.tytruss.com/Square-Truss/Square-Spigot-Truss.shtml