Principle of integrated temperature transmitter
1. The installation environment of the integrated temperature transmitter must be within -20-+70°C. When the ambient temperature is too high, the signal converter and display module can be installed separately from the thermal resistance or thermocouple. To be equipped with a special explosion-proof box for separately mounting the transmitter.
1. When used in explosion-hazardous places, please pay attention to the explosion-proof mark and protection level;
2. Before powering on, please carefully check the positive and negative polarity of the power supply, and do not connect it wrongly, otherwise it may cause unknown consequences.
3. The temperature transmitter needs to be calibrated after six months of use.
4. The signal converter module is potted and cured with epoxy resin to enhance its shockproof performance, and to prevent moisture, corrosion and moisture.